| Battery input data |
| Battery type |
Lithium-ion |
| Battery voltage range (V) |
40-60 |
| Max. charging current (A) |
120 |
| Max. Discharging current (A) |
120 |
| Charging Strategy for Li-ion Battery |
Self-adaption to BMS |
| Number of Battery Input |
1 |
| PV String Input Data |
| Max. DC Input Power (W) |
6500 |
| Max. DC Input Voltage (V) |
500 |
| Start-up Voltage (V) |
125 |
| MPPT Voltage Range (V) |
150-425 |
| Rated DC Input Voltage (V) |
370 |
| Max. Operating PV Input Current (A) |
13+13 |
| Max. Input Short-Circuit Current (A) |
17+17 |
| No. of MPP Trackers/ No. of Strings per MPP Tracker |
1/1 |
| AC Input/Output Data |
| Rated AC Input/Output Active Power (W) |
5000 |
| Max. AC Input/Output Apparent Power (VA) |
5500 |
| Rated AC Input/Output Current (A) |
22.7/21.7 |
| Max. AC Input/Output Current (A) |
25/23.9 |
| Max. Continuous AC Passthrough (grid to load) (A) |
35 |
| Peak Power (off-grid) (W) |
2 times of rated power, 10s |
| Power Factor Adjustment Range |
0.8 leading to 0.8 lagging |
| Rated Input/Output & Voltage/Range (V) |
220/230 0.85Un-1.1Un |
| Rated Input/Output Grid (Hz) |
50/45-55 |
| Frequency/Range(Hz) |
60/55-65 |
| Grid Connection Form |
L+N+PE |
| Total Current Harmonic Distortion THDi |
<3% (of nominal power) |
| DC Injection Current |
<0.5% In |
| Efficiency |
| Max. Efficiency |
97.60% |
| Euro Efficiency |
96.50% |
| MPPT Efficiency |
>99% |
| Equipment Protection |
| Integrated |
DC Polarity Reverse Connection Protection, |
| AC Output Overcurrent Protection AC Output Overvoltage Protection, |
| AC Output Short Circuit Protection, |
| Thermal Protection DC Terminal Insulation Impedance Monitoring, |
| DC Component Monitoring, |
| Ground Fault Current Monitoring |
| Power Network Monitoring, |
| Island Protection Monitoring, |
| Earth Fault Detection, |
| DC Input Switch Overvoltage Load Drop Protection, |
| Residual Current (RCD) Detection, |
| Surge protection level . |
| Surge Protection Level |
Type 2(DC), Type 2(AC) |
| Interface |
| Communication Interface |
WIFI, RS485, CAN |
| General Data |
| Operating Temperature Range (℃) |
-40 to +60℃, >45℃ Derating |
| Permissible Ambient Humidity |
0-100% |
| Permissible Altitude |
2000 m |
| Noise (dB) |
<30 |
| Ingress Protection(IP) Rating |
IP65 |
| Inverter Topology |
Non-Isolated |
| Over Voltage Category |
OVC II(DC), OVC III(AC) |
| Cabinet Size (WxHxD mm) |
330×433×229 (Excluding Connectors and Brackets) |
| Weight (kg) |
17 |
| Type of Cooling |
Natural Cooling |
| Warranty |
5 Years/10 Years |
| The Warranty Period Depends the Final Installation Site of Inverter |
| More Info Please Refer to Warranty Policy |
| Grid Regulation |
IEC 61727, IEC 62116, CEI 0-21, EN 50549, NRS 097, RD 140, UNE 217002, OVE-Richtlinie R25, G99, VDE-AR-N 4105 |
| Safety / EMC Standard |
IEC/EN 61000-6-1/2/3/4, IEC/EN 62109-1, IEC/EN 62109-2. |
|
| Battery Pack |
| Model |
FM-FP-5.3 |
| Main Parameter |
| Battery Chemistry |
LiFePO4 |
| Capacity (Ah) |
104 |
| Scalability |
Max. 64 pcs pack (340kWh) in parallel (Max. 32 pcs no external setup) |
| Nominal Voltage (V) |
51.2 |
| Operating Voltage (V) |
43.2~57.6 |
| Energy(kWh) |
5.32 |
| Usable Energy (kWh) |
4.79 |
| Charge/Discharge Current (A) |
| Recommend |
50 |
| Max |
100 |
| Peak |
150 (2mins, 25°C) |
| Other Parameter |
| Recommend Depth of Discharge |
90% |
| Dimension (W/H/D, mm) |
440*133*560 |
| Weight Approximate (kg) |
44 |
| Master LED Indicator |
5LED (SOC:20% ~ SOC100%), 3LED (working, alarming, protecting) |
| IP Rating of Enclosure |
IP20 |
| Operating Temperature |
5LED (SOC:20% ~ SOC100%), 3LED (working, alarming, protecting) |
| Storage Temperature |
0°C~35°C |
| Humidity |
5%~95% |
| Altitude |
≤2000m |
| Cycle Life |
≥6000 (25°C±2°C, 0.3C/0.3C, 90%DOD, 70%EOL) |
| Installation |
19-inch standard rack (depth≥600mm), Floor- Mounted, Wall – Mounted |
| Communication Port |
CAN2.0, RS485 |
| Warranty Period |
5 years |
| Energy Throughput |
16MWh@70%EOL |
| Certification |
CE, IEC62619, UN38.3 |
Reviews
There are no reviews yet.